-==<XTBA>==-

Smart Array P400 in Slot 33

array A

logicaldrive 1 (12.7 TB, RAID 5, Recovering, 4% complete)

bon 14h de reconstructions pour le Raid5, maintenant, parité!

array A (SATA, Unused Space: 0 MB)


logicaldrive 1 (12.7 TB, RAID 5, Recovering, 100% complete)

physicaldrive 1I:0:1 (port 1I:box 0:bay 1, SATA, 2 TB, OK)
physicaldrive 1I:0:2 (port 1I:box 0:bay 2, SATA, 2 TB, OK)
physicaldrive 1I:0:3 (port 1I:box 0:bay 3, SATA, 2 TB, Rebuilding)
physicaldrive 1I:0:4 (port 1I:box 0:bay 4, SATA, 2 TB, OK)
physicaldrive 2I:0:5 (port 2I:box 0:bay 5, SATA, 2 TB, OK)
physicaldrive 2I:0:6 (port 2I:box 0:bay 6, SATA, 2 TB, OK)
physicaldrive 2I:0:7 (port 2I:box 0:bay 7, SATA, 2 TB, OK)
physicaldrive 2I:0:8 (port 2I:box 0:bay 8, SATA, 2 TB, OK)

biour@LEVIATHAN:~$ sudo hpacucli ctrl slot=3 show config detail

Smart Array P400 in Slot 3
Bus Interface: PCI
Slot: 3
Serial Number: X
Cache Serial Number: X
RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: D
Firmware Version: 7.24
Rebuild Priority: High
Expand Priority: High
Surface Scan Delay: Not Available
Surface Scan Mode: High
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 15 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 0% Read / 100% Write
Drive Write Cache: Enabled
Total Cache Size: 512 MB
Total Cache Memory Available: 464 MB
No-Battery Write Cache: Enabled
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True

Array: A
Interface Type: SATA
Unused Space: 0 MB
Status: OK
Array Type: Data



Logical Drive: 1
Size: 12.7 TB
Fault Tolerance: 5
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 64 KB
Full Stripe Size: 448 KB
Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Failed
Unique Identifier: 600
Disk Name: /dev/cciss/c0d0
Mount Points: None
Logical Drive Label: X
Drive Type: Data